Instrument
|
Steel-String Acoustic
Guitar
|
|
| Pickup |
TWIN SoundSpot NTX |
| Position |
Inside the guitar under
the bridge |
Applying
The
Pickup |
The metal side of each pickup disc is stuck to the guitar’s
inside surface using double-sided adhesive tape. Position
the pickups as shown for balanced treble/bass-string pick-up
and maximum prevention of feedback. Note: Because you have
to work with your hand inside the soundhole, you can’t
see what you’re doing; therefore, you can find you bearings
by feeling for the holes that the strings pass through.
|
| Jack |
Use a 1/4" endpin
output jack. |
| Usage Tips |
The TWIN SoundSpot
NTX works well with all guitar and keyboard amps, as well as
P.A. systems and recording mixers. For added control over the
instrument’s tone, use a high-quality preamp. For P.A. and recording applications, a high-quality direct box such as as the D-TAR Solstice or Equinox is suggested. |
|
| Cutaway view shows the two pickup
discs mounted inside the guitar and connected to the endpin
jack. |
|
|
|
|
| Installation of the endpin
jack requires removing the original endpin and drilling the
hole larger in order to accommodate the increased diameter. |
