|
Instrument
|
Bouzouki
|
 |
| Pickup |
TWIN SoundSpot Classic |
| Position |
One pickup disc each at the far left and right,
clamped between the bridge and the top |
Applying
The
Pickup |
Before you proceed, remove the nameplate stickers from the
pickup discs. Instead of gluing the pickups to the instrument,
you must wedge them under the bridge with their metal side
against the bouzouki’s top. Make sure that the pickups
are clamped under the outermost points of the bridge’s
sides (you can lift the bridge there without first removing
the strings). The bridge stands on the pickup discs, which
are only about 3/16" (5mm) thick. Only the thinnest part
of each disc’s front is pushed under the bridge.
Note: To eliminate rattling, use a piece of tape to secure
the cable running from the pickups to the output jack.
|
| Jack |
A 1/4" output jack is attached
to the bottom of the instrument using a dual-locking hook-and-loop
strip. |
| Usage Tips |
All guitar amps and most other instrument
amps are suitable for use with an amplified bouzouki. For P.A.
and recording applications, a balanced sound is easily achieved
with a high-quality direct box. For P.A. and recording applications, a high-quality direct box such as as the D-TAR Solstice or Equinox is suggested. |
 |
|
|
